Uporabljamo piškotke, da naredimo vašo izkušnjo boljšo. V skladu z novo direktivo o e-zasebnosti, vas moramo vprašati za soglasje o nastavitvi piškotkov. Izvedite več.
X360 REED SESALNO KOLENO KIT (crankc.)PHBH VESPA PX 200 E
These new intake manifolds are supplied split up: the intake rubber can be rotated into the flange according to the specific requirements of the vehicle, in order to locate which is the best angle for the carburettor assembly.
for PIAGGIO ENGINES |
for YAMAHA-MINARELLI ENGINES |
for PIAGGIO ENGINES |
Material |
Inter-axis (mm) |
Inter-axis (hole) |
Ø Manifolds |
Ø Inlet |
Total length |
Carburettors applications |
Note |
2014520 |
VITON |
52 |
6,7 |
22 |
24,5 |
29 |
PHBG 15-21 |
Can be rotated of 360° |
2014519 |
VITON |
52 |
6,7 |
22 |
28 |
29 |
PHBG 15-21 |
Can be rotated of 360° |
2013802 |
VITON |
52 |
6,7 |
30 |
35 |
29 |
PHBH 26-30 |
Can be rotated of 360° |
for YAMAHA-MINARELLI ENGINES |
Material |
Inter-axis (mm) |
Inter-axis (hole) |
Ø Manifolds |
Ø Inlet |
Total length |
Carburettors applications |
Note |
2014524 |
VITON |
- |
6,7 |
22 |
24,5 |
33 |
PHBG 15-21 |
Can be rotated of 360° |
2014525 |
VITON |
- |
6,7 |
22 |
28 |
33 |
PHVB 22 |
Can be rotated of 360° |
2013847 |
VITON |
- |
6,7 |
30 |
35 |
52 |
PHBH 26-30 |
Can be rotated of 360° |
Products reserved exclusively for racing in specifically designed locations according to the provisions of the competent sporting authorities. We disclaim all liability for improper use
Proizvajalec | Model |
---|---|
VESPA | VESPA PX E 200 2T |
SKU | Naziv |
---|---|
0614915E | 2 gaskets for intake manifold thickness 0,5 mm |
0714917B | flange for intake rubber ø 32 mhr |
1314916B | mhr fkm intake rubber ø 32 |
1915596 | screw kit for vespa reed valve system |
210777B | clamp h.9 mm tightening 32 ÷ 50 |
2714152.C0 | valve vl17 mhr with carbon petals thickness 0.30 mm |
2715810.C0 | valve vl18 mhr team with carbon petals thickness 0.30 mm |
SKU | Naziv |
---|---|
1615550 | carburettor kit phbh 30 bd reed crankcase for vespa px e 2t 200 cc |